JR RS77S Overview:
Built on the same chassis as the popular R770 receiver, you're sure to love the same JR reliability along with the convenience of AutoScan tehcnology.
JR RS77S Key Features:
- Change frequencies at the push of a button
- ABC&W Interference Protection System
- PCM digital modulation
- Small, light to fit in a wide variety of models
- Highly sensitive for great range
- Glitch-free PCM performance
- AutoScan automatically tunes to your transmitter's frequency
JR RS77S Specifications:
- Type: Synthesized
- Number of Channels: 7-Channel
- Modulation: FM
- Band: 36MHz
- Dimensions:16 x 46 x 25 (HxLxW) mm
- Weight: 20g
How to Set the frequency on a JR PPL Synthesized Receiver
- Plug a battery into the RS70 receiver and turn power on.
- Turn on the transmitter and place it 1 metre from the receiver.
- Press and hold down the “SCAN” button on the end of the receiver for more than 2 seconds.
- Release the “SCAN” button for 2-3 seconds, then press the “SCAN” button again for ½-1 second.
- The LED will flash on and off quickly during the scanning process and once this process is completed the LED will stay solidly lit.
If the LED flashes slowly then there has been a problem with the scanning procedure and you should repeat the procedure after checking that the receiver battery has sufficient voltage and that there are not any other transmitters in the close vicinity of your receiver.