JR RS70 Overview:
Crystals are obsolete with the auto-sensing frequency selection capabilities of the exciting new JR R720 7-channel FM receiver. Built on the same chassis as the popular R700 receiver, you're sure to love the same JR reliability along with the convenience of ScanSelect tehcnology.
JR RS70 Key Features:
- Change frequencies at the push of a button
- ABC&W Interference Protection System
- FM (PPM) analog modulation
- Small, light to fit in a wide variety of models
- Highly sensitive for great range
- Perfect for sport aircraft
JR RS70 Specifications:
- Type: Synthesized
- Number of Channels: 7-Channel
- Modulation: FM
- Band: 36MHz
- Dimensions:16 x 46 x 25 (HxLxW) mm
- Weight: 20g
How to Set the frequency on a JR PPL Synthesized Receiver
- Plug a battery into the RS70 receiver and turn power on.
- Turn on the transmitter and place it 1 metre from the receiver.
- Press and hold down the “SCAN” button on the end of the receiver for more than 2 seconds.
- Release the “SCAN” button for 2-3 seconds, then press the “SCAN” button again for ½-1 second.
- The LED will flash on and off quickly during the scanning process and once this process is completed the LED will stay solidly lit.
If the LED flashes slowly then there has been a problem with the scanning procedure and you should repeat the procedure after checking that the receiver battery has sufficient voltage and that there are not any other transmitters in the close vicinity of your receiver.